新闻搜索 |
|
推荐图片 |
|
|
|
|
|
园林古建沙盘模型如何配景及细节体现方法 |
|
(时间:2019/11/11 16:22:49) |
咱们看到的建筑沙盘模型或者是园林古建沙盘模型,都会有一些起到画龙点睛效果的建筑小品。建筑小品是沙盘模型中常见的组成部分,尽管所占的比例小,但是却不可或缺,常见的建筑小品有雕塑、假山、休闲设备和浮雕等。那么,沙盘模型中的建筑小品应该怎样制造?杭州景文模型公司人员为您解答: The sand table model of architecture or the sand table model of ancient landscape architecture we see will have some architectural sketches that can make the finishing point. Architectural sketch is a common part of sand table model. Although it accounts for a small proportion, it is indispensable. Common architectural sketch includes sculpture, rockery, leisure equipment and relief. Then, how to make the building sketch in the sand table model? The staff of Hangzhou Jingwen model company answers for you: 一、在制造建筑小品模型时,要依据表现对象来选择适宜的材料,如: I. when manufacturing the building sketch model, appropriate materials shall be selected according to the performance objects, such as: a、在制造假山类小品,可用碎石块或碎有机玻璃块,通过粘合、喷色,便可制造形态万千的假山。 A. in the manufacturing of rockery, you can use broken stones or broken plexiglass blocks to make rockeries in thousands of forms by gluing and spraying colors. b、在制造雕塑类小品时,可用橡皮、纸黏土、石膏、铁线、木条等可塑性强的材料来堆积、制造表现力和感染力极强的雕塑小品。 B. when making sculptures, plastic materials such as rubber, paper clay, gypsum, iron wire and wood bar can be used to accumulate and make sculptures with strong expressiveness and appeal. c、在制造其他的建筑小品时,可采用各种色彩的橡皮泥塑进行塑造。 C. when manufacturing other architectural pieces, various colors of rubber clay can be used for molding. d、在制造浮雕类建筑小品时,可采用薄铜片制造,但需注意取材要薄。 D. when making relief architectural pieces, thin copper sheets can be used, but the materials should be thin. 二、不同建筑小品制造方法不同,如: 2. The manufacturing methods of different architectural pieces are different, such as: a、薄铜片做浮雕模型很形象,其做法是,按比例将铜片裁好,用刻蜡纸笔在铜片的背面划出图画,翻过来用建筑胶粘在要求的位置,即形成浮雕模型; A. It's very vivid to make relief model of thin copper sheet. The method is to cut the copper sheet according to the proportion, draw a picture on the back of the copper sheet with crayon, turn it over and glue it to the required position with building glue, that is to form relief model; b、将粉笔用刻刀加工后,配上有机玻璃片底台就能做出雕像模型; B. after the chalk is processed with a carving knife, the statue model can be made with a plexiglass plate platform; c、用各种色彩的橡皮泥可塑造出多种建筑小品模型; C. various models of architectural sketches can be created with various colors of plasticine; d、把各种做盆景用的吸水石砸成小块,用801大力胶粘成各种形状即成假山模式。这个需求依据具体的制造小品和使用材料来决定。 D. smash all kinds of water absorption stones used for bonsai into small pieces, and glue them into various shapes with 801 force to form rockery mode. This demand is based on the specific manufacturing of small products and materials to be used. 以上便是关于沙盘模型中的建筑小品制造方法就介绍到这,沙盘模型中的建筑小品在表现形式和深度上要依据模型的比例和主体深度而定。—般来说,在表现形式要抽象化。由于,这类小品的物象是经过缩微的,没有必要、也不可能与什物完全一致。有时,这类配景过于具象往往会引起人们视觉中心的转移。一起,也难免发生几分工匠制造的滋味。所以,制造建筑小品一定要合理地选用材料,恰当地运用表现形式,准确地把握制造深度。只有做到三者的有机结合,才干处理好建筑小品的制造,一起达到预期的效果。 The above is the introduction of the manufacturing method of the architectural sketch in the sand table model. The form and depth of the architectural sketch in the sand table model should be determined according to the scale of the model and the depth of the main body. Generally speaking, the expression should be abstract. Because the object image of this kind of sketch has been miniaturized, it is unnecessary and impossible to be completely consistent with the thing. Sometimes, this kind of scenery is too figurative, which often causes people's visual center to shift. Together, it's hard to avoid the taste of craftsmanship. Therefore, we must select materials reasonably, use expression forms properly, and grasp manufacturing depth accurately. Only by the organic combination of the three, can we deal with the manufacturing of architectural sketches and achieve the desired results together.
|
|
|
|
|
|
|
|
|
|
|
|