 新闻搜索 |
|
| 推荐图片 |
|
|
|
|
|
建筑模型工艺之确定建筑沙盘模型比例技巧 |
|
（时间:2019/11/13 12:20:29） |
咱们都知道平常在房地产公司看到的建筑沙盘模型都是根据建筑所制造出来的模型。当然，咱们所看到的建筑沙盘模型一般都是通过不同的比例缩放。然而很多小伙伴们并不知道怎么规划建筑沙盘模型的制造比例?杭州景文模型公司小编为大家讲解：
We all know that the building sand table models we usually see in real estate companies are based on the models made by buildings. Of course, the sand table models we see are generally scaled by different scales. However, many of you don't know how to plan the manufacturing proportion of the sand table model
建筑沙盘模型的比例缩放主要由体现规划、资料特性、细节程度三个方面来综合断定。下面小编来重点讲讲资料特性。
The scale of the building sand table model is determined by three aspects: planning, data characteristics and detail level. Next, I will focus on the characteristics of materials.
资料特性：
Data characteristics:
一般来说，建筑沙盘模型的比例设定与资料特性密切相关，然而建筑沙盘模型的体量巨细直接影响资料选配。小编就举个列子吧，在无支撑的建筑沙盘模型结构中，1.2mm厚纸板能控制在200mm内不变形，2mm厚PVC板能控制在300mm内不变形，5mm厚KT板能控制在400mm内不变形，10mm扎实木板能控制在800mm内不变形。假如将以上资料相互叠加组合，强度会进一步添加，满意大体量建筑沙盘模型的制造要求。
Generally speaking, the scale setting of building sand table model is closely related to the data characteristics. However, the size of building sand table model directly affects the data selection. For example, in the structure of unsupported building sand table model, 1.2mm thick cardboard can be controlled within 200mm without deformation, 2mm thick PVC plate can be controlled within 300mm without deformation, 5mm thick ktplate can be controlled within 400mm without deformation, and 10mm solid wood plate can be controlled within 800mm without deformation. If the above data are superposed and combined with each other, the strength will be further added to meet the manufacturing requirements of large-scale building sand table model.
所以相同的，小体量建筑沙盘模型也对资料特性有所限定，例如：1:2000以上规划模型，单体建筑模型的长、宽、高一般为30~80mm，使用硬纸板很难深化加工，而PS块材却是很好的资料，能够采用电热曲线切割机锯切成各种形体，满意不同的建筑沙盘模型制造需求。
Therefore, the sand table model of small building also limits the data characteristics. For example, for the planning model of 1:2000 or above, the length, width and height of the single building model are generally 30-80mm, and it is difficult to deepen the processing with cardboard, while PS block is a good data, which can be sawed into various shapes with the electric thermal curve cutting machine, satisfying the manufacturing requirements of different sand table models.
以上便是资料特性的悉数介绍了，咱们在规划建筑沙盘模型的制造比例缩放上一定要考虑体现规划、资料特性、细节程度三个方面，这是很重要的。
The above is a full introduction of data characteristics. We must consider three aspects of planning, data characteristics and detail level in the scale of manufacturing planning building sand table model, which is very important.
|
|
|
|
 |
 |
 |
 |
 |
|
|
|
