 新闻搜索 |
|
| 推荐图片 |
|
|
|
|
|
建筑模型比例与尺寸的确定应根据需求确定 |
|
（时间:2020/7/15 9:03:23） |
城市建筑的建设离不开前期的发展规划设计，建筑是城市不可或缺的因素，通过对建筑的设计制作及建筑设计的展示，城市建筑设计的的宏伟蓝图方可在城市建设中发挥美的风景及相关实用价值。建筑模型是按照建筑物与建筑周边环境按照一定比例缩放制作出来的“微缩世界”，建筑模型被广泛用于地产开发、城市规划建设中。
建筑模型 (推荐阅读：杭州景文沙盘模型公司http://www.jwmoxing.com)
建筑模型制作的好坏尺寸比例拿捏精准也是一个关键的因素，一般在展厅内的沙盘模型的比例和尺寸都是恰到好处，即留有足够达到观赏空间供参观者进行观赏，恰到好处的沙盘展示设计不会让整个展厅显得空荡。模型公司有着二十多年的沙盘模型制作经验，来告诉您该如何制定沙盘模型比例与尺寸。
在制作建筑模型之前的工作就是要确定沙盘模型尺寸的大小，确定沙盘模型的大小需要确定沙盘模型展厅场地的大小布局、参观者的动态线路、模型参观的数量、模型摆放位置的大小及展厅入口大门的高度宽度等因素。比较大的沙盘模型会分成两块或两块以上，这样的做法是方便运输及安装。根据上述所需的几项因素，使用最简单的方法就是的计算机3D空间中模拟大致的沙盘模型大小，用该尺寸去除沙盘模型实际要展示的场地用地大小，模型公司http://www.chnmodel.com就这样就得到了比例；再用比例推算模型的大小，有了大致的概念，把比例调整到一个整数。展示范围做相对应的取舍，这样就得到了沙盘模型的尺寸和比例。
建筑模型
建筑模型比例
如在运输方面缺少经验，较大的建筑模型制作完后，发现建筑模型在运输进门这个问题，建筑模型的一边长度应控制在1.8M以内，再大就要再进行切块做适当的调整。另外，不需要布置展会的建筑模型可以不考虑场地的问题，不需要考虑场地的模型比例一般根据模型的使用目的及模型的面积来确定。这就是为什么我们作为模型公司报价一时间报不出来的重要因素，不确定客户的具体情况是没法进行报价的。再说，单体建筑及少量的群体景物组合应选择较大的比例，如1:5、1:100、1:300等；大面积的绿地和区域性规划应选择较小的比例，如1:1000、1:2000、1:3000等。
建筑模型尺寸
模型尺寸的确定要进行进行比较。模型的大小是通过比较来的，大并不是指体积重量上的绝对的大，只能用生活中常见的生活参照物来进行比较才能得出答案。指定的景物在等比例的关系空间里做的太大或者太小，就会和周边的道路比例衔接不上和其他的建筑物的位置关系也无法确定的重大问题。有的客户要求夸张的把建筑做大及地形做陡，这样这样做会导致总体的比例失衡，增强展现范围的局促感就会显得不伦不类，尺寸均衡才是最好的模型制作时的最佳尺寸。
The construction of urban buildings is inseparable from the early development planning and design. Architecture is an indispensable factor in the city. Through the design and production of buildings and the display of architectural design, the grand blueprint of urban architectural design can only play the beautiful scenery in urban construction. And related practical value. The architectural model is a "miniature world" produced by scaling the building and the surrounding environment of the building according to a certain scale. The architectural model is widely used in real estate development and urban planning and construction.
Architectural model (Recommended reading: Hangzhou Jingwen Sand Table Model Company http://www.jwmoxing.com)
The precision of the size of the building model is also a key factor. The proportion and size of the sand table model in the exhibition hall are generally just right, that is, there is enough space for the viewing space for visitors to watch, and the right sand table display design is not It will make the whole exhibition hall seem empty. The model company has more than 20 years of experience in making sand table models, to tell you how to formulate the sand table model scale and size.
The work before making the architectural model is to determine the size of the sand table model. Determining the size of the sand table model needs to determine the size layout of the sand table model exhibition hall, the dynamic routes of the visitors, the number of model visits, the size of the model placement and the exhibition hall. Factors such as the height and width of the entrance gate. The larger sand table model will be divided into two or more pieces, which is convenient for transportation and installation. According to the above-mentioned several factors, the simplest way to use is to simulate the approximate size of the sand table model in the computer 3D space, and use this size to remove the actual size of the site land to be displayed by the sand table model. Model company http://www.chnmodel .com just got the ratio in this way; then use the ratio to calculate the size of the model. With a rough idea, adjust the ratio to an integer. Corresponding trade-offs are made for the display range, so that the size and proportion of the sand table model are obtained.
Architectural model
Architectural model scale
If there is no experience in transportation, after the larger building model is made, it is found that the building model is transporting into the door. The length of one side of the building model should be controlled within 1.8M. If it is larger, it must be cut again to make appropriate adjustments. In addition, the architectural model that does not need to be arranged for the exhibition can not consider the problem of the site, and the model scale of the site does not need to be considered. It is generally determined according to the purpose of the model and the area of ??the model. This is why we as the model company cannot quote an important factor for a while, and we are not sure about the specific situation of the customer. Furthermore, the combination of single building and a small number of group scenery should choose a larger ratio, such as 1:5, 1:100, 1:300, etc.; the large area of ??green space and regional planning should choose a smaller ratio, such as 1: 1000, 1:2000, 1:3000, etc.
Building model dimensions
The size of the model is determined for comparison. The size of the model is obtained by comparison. Large does not refer to the absolute size of the volume and weight. The answer can only be obtained by comparing the common reference objects in life. If the designated scene is made too large or too small in the equal-proportion relationship space, it will not be connected to the surrounding road scale, and it will be a major problem that the location relationship of other buildings cannot be determined. Some customers require exaggerating the building to be larger and the terrain to be steeper. In this way, the overall proportion will be unbalanced, and the sense of cramping to enhance the scope of the display will appear incoherent. Balanced size is the best size for the best model making. .
|
|
|
|
 |
 |
 |
 |
 |
|
|
|
