 新闻搜索 |
|
| 推荐图片 |
|
|
|
|
|
机械工业沙盘模型用途广泛工艺复杂 |
|
（时间:2019/12/4 12:09:51） |
现在很多工业都利用沙盘模型来展示自己工厂以及产品，工业模型灵活性表现在不同的设计阶段，可以根据需要采用不同的表现比例和材料以及不同的细节表现程度，不同的时期制作模型的工艺和材料是不同的，每个模型公司的工艺和用料也是不一样的。杭州景文模型公司梳理了机械工业沙盘模型制作流程？
机械工业沙盘模型制作流程：
a、模型台子：一般情况下，制作工业模型是放在玻璃罩里，而不放在台子上。
b、PVC板喷漆：喷漆部根据楼房图纸的设色调出相应颜色的油漆来，喷在相应的PVC板上，送到设计部进行雕刻。
c、雕刻部件：设计部根据实际情况按比例设计出的结构，并在电脑上分解成不同的板块，按要求设计好，然后雕刻出各板块，送到制作部制作。工业模型基本上是和建筑模型做法相似，依图纸按一定的比例缩小，雕刻出板块，用三氯甲烷粘合。
d、组合部件：制作部根据设计部送来各部件，根据说明和粘合方式，用三氯甲烷将PVC板块粘合成工业模型的大致形状。
机械工业沙盘模型制作所需物料及设备：
设备：电脑，设计软件AutoCAD，雕刻机，工作台，油漆喷枪等。
原材料：各种厚度的有机玻璃板，各种厚度的PVC板，普通海绵，大孔海绵，背胶纸，各色绒线末，粗鱼线，铜丝电线，0.5mm漆包线，涂料，各色油漆，绒面墙纸，三氯甲烷，干花，发胶，小彩灯等。
机械工业沙盘模型制作流程今天就分享这，不管采用何种手法与比例建造模型，都应该明白建筑模型和建筑实体之间应该体现出一种缩比关系。
Nowadays, many industries use sand table model to show their own factories and products. The flexibility of industrial model is reflected in different design stages. Different performance proportions and materials and different levels of detail performance can be adopted according to needs. The process and materials for making models are different in different periods, and the process and materials for each model company are also different. Hangzhou Jingwen model company combed the sand table model manufacturing process of mechanical industry?
Sand table model manufacturing process of mechanical industry:
A. model table: generally, the industrial model is made in the glass cover instead of on the table.
B. painting of PVC board: the painting department shall call out the paint of corresponding color according to the color setting of the building drawing, spray it on the corresponding PVC board, and send it to the design department for carving.
C. carving parts: the structure designed by the design department in proportion according to the actual situation, and decomposed into different plates on the computer, designed according to the requirements, then carved out each plate, and sent to the production department for production. The industrial model is basically similar to the architectural model, which is reduced according to the drawings in a certain proportion, carved out plates, and bonded with chloroform.
D. combined parts: the production department shall send all parts according to the design department, and use chloroform to glue PVC plate into the approximate shape of industrial model according to the instructions and bonding methods.
Materials and equipment for sand table model making in mechanical industry:
Equipment: computer, design software AutoCAD, engraving machine, workbench, paint spray gun, etc.
Raw materials: various thickness of plexiglass board, various thickness of PVC board, common sponge, large hole sponge, gummed paper, all colors of lint, thick fishwire, copper wire, 0.5mm enameled wire, paint, all colors of paint, suede wallpaper, chloroform, dried flower, hair glue, small color lamp, etc.
The sand table model making process of mechanical industry is shared today. No matter what method and proportion are used to build the model, it should be understood that there should be a scaling relationship between the building model and the building entity.
|
|
|
|
 |
 |
 |
 |
 |
|
|
|
