 新闻搜索 |
|
| 推荐图片 |
|
|
|
|
|
模型沙盘中辅件模型繁多，其重要性不容忽视 |
|
（时间:2020/1/2 15:02:11） |
我们看到的模型沙盘或者是园林景观模型，都会有一些起到画龙点睛效果的建筑辅件。建筑辅件是模型沙盘中常见的组成部分，虽然所占的比例小，但是却不可或缺，常见的建筑辅件有雕塑、假山、休闲设施和浮雕等。那么，模型沙盘中的建筑辅件应该怎样制作?杭州景文模型沙盘公司人员为您解答：
一、在制作建筑辅件模型时，要根据表现对象来选择合适的材料，如：
a、在制作假山类辅件，可用碎石块或碎有机玻璃块，通过粘合、喷色，便可制作形态各异的假山。
b、在制作雕塑类辅件时，可用橡皮、纸黏土、石膏、铁线、木条等可塑性强的材料来堆积、制作表现力和感染力极强的雕塑辅件。
c、在制作其他的建筑辅件时，可采用各种颜色的橡皮泥塑进行塑造。
d、在制作浮雕类建筑辅件时，可采用薄铜片制作，但需注意取材要薄。
二、不同建筑辅件制作方法不同，如：
a、薄铜片做浮雕模型很形象，其做法是，按比例将铜片裁好，用刻蜡纸笔在铜片的背面划出图案，翻过来用建筑胶粘在要求的位置，即形成浮雕模型;
b、将粉笔用刻刀加工后，配上有机玻璃片底台就能做出雕像模型;
c、用各种颜色的橡皮泥可塑造出多种建筑辅件模型;
d、把各种做盆景用的吸水石砸成小块，用801大力胶粘成各种形状即成假山模式。这个需要根据具体的制作辅件和使用材料来决定。
以上就是关于模型沙盘中的建筑辅件制作方法就介绍到这，模型沙盘中的建筑辅件在表现形式和深度上要根据模型的比例和主体深度而定。—般来说，在表现形式要抽象化。因为，这类辅件的物象是经过缩微的，没有必要、也不可能与实物完全一致。有时，这类配景过于具象往往会引起人们视觉中心的转移。同时，也不免产生几分工匠制作的味道。所以，制作建筑辅件一定要合理地选用材料，恰当地运用表现形式，准确地掌握制作深度。只有做到三者的有机结合，才能处理好建筑辅件的制作，同时达到预期的效果。
The model sand table or garden landscape model we see will have some building accessories that can make the finishing point. Building accessories are common components of the model sand table. Although they account for a small proportion, they are indispensable. Common building accessories include sculpture, rockery, leisure facilities and relief. Then, how should the building accessories in the model sand table be made? The staff of Hangzhou Jingwen model sand table company answers for you:
1、 When making a building auxiliary model, you should select appropriate materials according to the performance objects, such as:
a. In the production of rockery accessories, broken stones or broken plexiglass blocks can be used. By bonding and spraying colors, rockeries of different shapes can be made.
b. When making sculpture accessories, we can use rubber, paper clay, gypsum, iron wire, wood and other plastic materials to pile up and make sculpture accessories with strong expressiveness and appeal.
c. In the production of other building accessories, you can use a variety of colors of plasticine to shape.
d. When making relief building accessories, thin copper sheet can be used, but the materials should be thin.
2、 The manufacturing methods of different building accessories are different, such as:
a. The method of making relief model with thin copper sheet is to cut the copper sheet according to the proportion, draw a pattern on the back of the copper sheet with crayon, turn it over and glue it with building glue at the required position, that is to form relief model;
b. After the chalk is processed with a carving knife, a statue model can be made with a plexiglass plate platform;
c. Various models of building accessories can be created with various colors of plasticine;
d. Smash all kinds of water absorption stones for bonsai into small pieces, and glue them into various shapes with 801 force to form rockery mode. This needs to be determined according to the specific manufacturing accessories and materials used.
This is how to make the building accessories in the model sandbox. The form and depth of the building accessories in the model sandbox are determined by the scale of the model and the depth of the main body. Generally speaking, the expression should be abstract. Because the image of such auxiliary parts has been miniaturized, it is unnecessary and impossible to be completely consistent with the real object. Sometimes, this kind of scenery is too figurative, which often causes people's visual center to shift. At the same time, it can't help but produce a taste of craftsmanship. Therefore, to make building accessories, it is necessary to select materials reasonably, use expression forms properly, and master production depth accurately. Only the organic combination of the three can deal with the production of building accessories and achieve the desired results.
|
|
|
|
 |
 |
 |
 |
 |
|
|
|
